GAP验厂简介，GAP质量审核技术规范-裁剪问题及相关要求

Section

Q no.

Question

Cutting

裁剪

1

Check if there are proper control of pile height for cutting?

是否有检查拉布高度？

Cutting

2

Check if the production marker with panels are properly laid flat, overlapped with proper special marker, cut by pieces using appropriate scissors/ band knife/ die cut/ lazar cut…etc.? 

有无检查唛架是否正确的平辅，是否有重叠和标记，使用适当的剪刀/带式刀/打孔机等？

Cutting

3

Is there proper control for matching / cutting of patterned fabrics such as plaids & stripes? (Only for plaids/ stripes)

裁剪时是否合理控制条字布和格子布使其对条对格？

Cutting

4

Is spreading methodology is found with appropriate  tension; stretch /knit fabric relaxation process correct, PU and leather in correct shading separation, suitable controlled environment condition for relaxation/ temporary storage ?

是否使用适当的力来拉布以避免张力，针织布的松布程序是否正确，PU和皮革是否正确的分开色差，是否在适当的环境松布，松好的布是否储存在受控区？

Cutting

5

Is there roving QC checking cutting accuracy?

QC有无检查裁剪的精确度？

Cutting

6

Are cut pieces properly inspected and numbered?

裁片有无检查和编号？

Cutting

7

Does factory has good housekeeping on leftover fabric/ cut panels/ waste fabric?

对每匹布裁剩的布尾有无很好的记录和保存，以备配片之需？

Cutting

8

Is there work-in-progress balance between cutting and production output to adequately fulfill daily production requirement?

是否有衡量裁剪和其他生产过程的产量足以达到日产能要求？

Cutting

9

Indicate fusing method used? - Hand Iron , trouser steam press, small piece fusing press, continuous roller fusing press.

烫衬用的是熨斗、蒸汽压力机、小的熔化块还是滚筒式熔化机？

Cutting

10

Is fusing quality acceptable, machines regularly calibrated and records maintained?

烫衬质量是否可接受，机器是否定期较准和维护并保存记录？

Cutting

11

Are bulk cut goods and trims, designated for either internal or off-premise handling (such as sewing, laundry, embroidery, printing), transported in a well-organized and protected manner?

在内部或外部处理（如缝制、水洗、绣花、印花）的产品和辅料在转送或运输过程当中是否有序且受到保护？

Cutting

12

Is there metal/ needle control policy implemented?

是否实施金属和利器控制程序？

Cutting

13

Are all machines in good conditions/ setting and maintenance? Wiring?

机器是否状况良好并定期维护？

Cutting

14

Is the molding process in consistent setting and operating? 
冲压过程是否持续设定和运行？